These wheels are manufactured by compression molding shredded cotton fabric, soaked in good quality phenolic resin. The hardness of Fibre wheel is higher than the hardness of UHMW wheel. As a result, the chance of steel burr lying on the shop floor getting embedded in the wheel surface is remote. The acidic or alkaline chemicals have little effect on these wheels.
|
TECHNICAL DETAILS – FIBRE WHEELS |
||||||||
Size of Wheel Dia x Width |
Width of boss of Wheel |
Size of bore for wheel with |
Ball bearing used |
Load Carrying Capacity |
||||
PLB d mm |
NYL d mm |
SIB d mm |
NRB d mm |
BB d mm |
||||
100 x 32 |
45 |
15.9 |
--- |
15.9 |
19.0 |
20.00 |
6004 |
130 |
100 x 50 |
60 |
25.4 |
--- |
25.4 |
19.0/25.4 |
25.00 |
6205 |
225 |
150 x 50 |
60 |
25.4 |
--- |
25.4 |
19.0/25.4 |
25.00 |
6205 |
400 |
Notes :